High Precision Automatic E-Coating System for Steel Door Production
Indoor environment requirement for coating:
1. Room temperature: RT
2. Air speed: 0.3~0.6 m/s
3. Illumination: More than 500 Lx
4. Noise: Less than 85 dB
Coating line water drying:
| No. |
Item |
Technical parameter |
| 1 |
Structure type |
Insert board assembly bridge type hot air circulation oven |
| 2 |
Inner size |
According to design requirement |
| 3 |
Drying temperature |
110~150ºC |
| 4 |
Drying time |
10~15 min |
| 5 |
Fixed point temperature difference in drying tunnel |
±5ºC |
| 6 |
Heating up time |
<40 min |
| 7 |
Installed power |
100000 Kcal |
| 8 |
Energy |
0 # diesel or electric |
| 9 |
Circulation air volume |
7000 m3/h |
| 10 |
Waste gas discharge system |
Equipped with regulating valve |
Electrophoresis coating system:
Cathodic epoxy electro coating is highly corrosion resistant. A thin dry film thickness can withstand long time salt spray test.
Electrocoating has the ability to give very even coating with variances ranging to only 1-2 microns. E-coating assures the uniform of coating.
Coating line design parameter:
Audited Supplier 
){kind=link}
){kind=link}